Epson TM-L90 series - Page 7

Version 3.00 Feb. 2019
3
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-L90)
2) Parallel Port
DIP-SW1
No. Setting
1 OFF Settable
2 OFF Fixed at OFF
3 OFF Fixed at OFF
4 OFF Fixed at OFF
5 OFF Fixed at OFF
6 OFF Fixed at OFF
7 OFF Fixed at OFF
8 OFF Fixed at OFF
Set DIP-SW1-1 (Power button function).
If this DIP Switch is ON, the power button is disabled.
Make other settings in accordance with the settings described above.
3) USB Port
DIP-SW1
No. Setting
1 OFF Settable
2 OFF Fixed at OFF
3 OFF Fixed at OFF
4 OFF Fixed at OFF
5 OFF Fixed at OFF
6 OFF Fixed at OFF
7 OFF Fixed at OFF
8 OFF Fixed at OFF
Set DIP-SW1-1 (Power button function).
If this DIP Switch is ON, the power button is disabled.
Make other settings in accordance with the settings described above.