Epson TM-T70 II User Manual

15
Chapter 2 Installation
2
Changing the USB Class
Follow the steps below to change the USB class to vendor class or printer class.
1
Select [System Preferences] - [Print & Fax] to open the “Print & Fax” screen. Double-click
the printer in the list to open the print queue screen.
2
Start TM Launcher.
Mac OS X 10.6 / 10.7 / 10.8:
Click [Printer Setup]. Select the [Utility] tab and click the [Open Printer Utility] button.
Mac OS X 10.5:
Click [Utility].
3
The “TM Launcher” screen appears. Select [TM USB Class Setting Tool].
Make sure the printer power is on while you change the USB class.

Epson TM-T70 II Specifications

General

Print Method	Thermal line printing
Print Speed	250 mm/sec
Weight	1.8 kg
Auto Cutter	Yes
Paper Roll Diameter	83 mm
Paper Width	79.5 ±0.5 mm
Interface	USB, Serial, Ethernet
Dimensions	125‎ x 194 x 114 mm (Width x Depth x Height)
Operating Temperature	5 to 45 °C
Operating Humidity	10 - 90%