Epson TM-T70 II User Manual

24
4
The “Add Printer” screen appears. Select the new “Printer B” and change the [Name] to
“Printer A”. Select the same [Print Using] setting as “Printer A” and click the [Add]
button.
This completes the printer replacement procedure. When printing is performed with “Printer A”
selected, the print job is output to “Printer B”.
Replacing a Printer (Ethernet/Wireless Connection)
1
Set the IP address of “Printer B” to the same address as “Printer A”.
For details on setting the IP address, see page 19.
2
Disconnect “Printer A” from the network and connect “Printer B” to the network.
This completes the procedure for replacing a printer. When printing is performed with “Printer A”
selected, the print job is output to “Printer B”.

Epson TM-T70 II Specifications

General

Print Method	Thermal line printing
Print Speed	250 mm/sec
Weight	1.8 kg
Auto Cutter	Yes
Paper Roll Diameter	83 mm
Paper Width	79.5 ±0.5 mm
Interface	USB, Serial, Ethernet
Dimensions	125‎ x 194 x 114 mm (Width x Depth x Height)
Operating Temperature	5 to 45 °C
Operating Humidity	10 - 90%