22
Shutdown
(Firmware version
2.5 or later)
PowerButton Designates whether to enable / disable shutdown when
oressed power button.
“Enable” / “Disable”
ePOSDevice Designates whether to enable / disable shutdown from the
ePOS-Device API.
“Enable” / “Disable”
RequirePassword Designates whether shutdown from the ePOS-Device API
requires password authentication.
“Enable” / “Disable”
SSL
(Firmware version
2.5 or later)
UserSSL Designates whether to enable / disable SSL communica-
tion.
“Enable” / “Disable”
PrivateKeyFile Designates the private key file(*.*).
Valid file name any extension
This must be set if the value for SSL is "Enable".
This is ignored if the value for SSL is "Disable".
CertificateFile Designates the certificate file(*.*).
Valid file name any extension
This must be set if the value for SSL is "Enable".
This is ignored if the value for SSL is "Disable".
CertificateChain-
File
Designates the certificate chain file(*.*).
Valid file name any extension
This is ignored if the value for SSL is "Disable".
Password
NewPassword Designates the password set in WebConfig for the TM-DT to
be copied.
Within 30 alphanumeric characters.
Password For authentication, designates the password set in
WebConfig for the TM-DT to be copied.
The initial setting is "epson". This is a necessary item for the
TM-DT to be copied.
Within 30 alphanumeric characters.
Section name Parameter
Description
Valid value