Using the Printer 2-1
Chapter 2
Using the Printer
Operating the Control Panel
You can feed paper with the button on the control panel. The
indicator lights help you monitor the printer’s status.
Switch
The power switch on the front of the printer turns the printer on
and off.
Button
FEED
Press the
FEED
button once to advance roll paper one line. You can
also hold down
FEED
to feed the paper continuously.
Note:
This button can be disabled by the ESC c 5 command, but depending
on the setting of GS z 0 command, it can work while replacing the
paper roll even if it has been disabled.
To Next Page
Loading...
