Epson TM-U200 - Chapter 4 Reference Information; Printing Specifications

Reference Information 4-1
Chapter 4
Reference Information
Printing Specifications
Note:
When printing exceeds the allowable print duty cycle, the printer
automatically stops printing. In this case, the printing speed
described above is not guaranteed.
When selecting red-color or 2-color (black/red) combination
printing, the printing speed goes down, compared to black-color
printing. It is caused by the switching operation in the printer.
Printing method:
Serial impact dot-matrix
Head wire
configuration:
9-pin serial configuration
Printing direction:
Bi-directional, logic-seeking
Characters/line
(default):
See table on page 4-2.
Character spacing
(default)
Fonts A and B:
See table on page 4-2.
Printing speed:
Approximately 3.5 lines/second (40
columns, 16 characters/inch)
Approximately 6.4 lines/second (16
columns, 16 characters/inch)
(excluding data transmission time and
processing time)