Epson WF-2531 User Manual

C
Click the Head Cleaning icon.
D
Follow the on-screen instructions.
Using the control panel
Follow the steps below to clean the print head using the product control panel.
A
Make sure that no warnings or errors are indicated in the control panel.
B
Press x to display the menus.
C
Select Maintenance.
D
Select Head Cleaning.
E
Follow the instructions on the LCD screen to continue.
Aligning the Print Head
If you notice a misalignment of vertical lines or horizontal banding, you may be able to solve this problem by using the
Print Head Alignment utility in your printer driver or by using the product buttons.
Refer to the appropriate section below.
Note:
Do not press y to cancel printing while printing a test pattern with the Print Head Alignment utility.
Using the Print Head Alignment utility for Windows
Follow the steps below to align the print head using the Print Head Alignment utility.
A
Make sure that no warnings or errors are indicated in the control panel.
B
Make sure A4-size paper is loaded in the rear paper feed.
C
Right-click the product icon on the taskbar, then select Print Head Alignment.
If the product icon does not appear, refer to the following section to add the icon.
& “From the shortcut icon on the taskbar” on page 30
User’s Guide
Maintaining Your Product and Software
106

Epson WF-2531 Specifications

General

Brand	Epson
Model	WF-2531
Category	Printer
Language	English