Epson WF-2660 - Scanned Image Problems; Scan Quality Is Poor; Characters Are Blurred; An Image of the Reverse Side of the Original Appears in the Scanned Image

Scanned Image Problems
Scan Quality Is Poor
❏ Clean the scanner glass and the document cover.
❏ Clean the roller in the ADF.
❏ Do not press too hard on the original or the document cover when you are placing the originals on the scanner
glass. Uneven colors, smears, or dots may appear when the original or the document cover are pressed too hard.
❏ Remove dust from the original.
❏ Make the appropriate document type settings on the control panel.
❏ Scan at a higher resolution.
❏ Adjust the image in EPSON Scan, and then scan. See the EPSON Scan help for details.
Related Information
& “Cleaning the Scanner Glass” on page 97
& “Cleaning the ADF” on page 95
& “Scan Mode” on page 18
Characters Are Blurred
❏ In Oce Mode in EPSON Scan, select Image Option on the Image Adjustment tab, and then select Tex t
Enhancement.
❏ In Professional Mode in EPSON Scan, select Document as the Auto Exposure Type in the Original settings.
❏ Adjust the threshold settings in EPSON Scan.
❏ Oce Mode
Select Black & White as the Image Type on the Main Settings tab, and then adjust the threshold setting on
the Image Adjustment tab.
❏ Professional Mode
Select Black & White as the Image Type setting, and then adjust the threshold setting.
❏ Scan at a higher resolution.
An Image of the Reverse Side of the Original Appears in the
Scanned Image
❏ For a thin original, place the original on the scanner glass and then place a piece of black paper over it.
❏ Make the appropriate document type settings on the control panel or in EPSON Scan.
❏ In Oce Mode in EPSON Scan, select Image Option on the Image Adjustment tab, and then select Tex t
Enhancement.
Related Information
& “Scan Mode” on page 18
User's Guide
Solving Problems
126