Epson WF-2660 - Various Ways of Sending Faxes

2. Pick up the handset of the connected telephone, and then dial the recipient's fax number using the phone.
3. Press Start Fax on the printer's control panel, and then press Send.
4. Press Menu, select Fax Send Settings, and then make settings such as the resolution and the sending method
as necessary.
5. When you hear a fax tone, press the
x button, and then hang up the handset.
Note:
When a number is dialed using the connected telephone, it takes longer to send a fax because the printer performs
scanning and sending simultaneously. While sending the fax, you cannot use the other features.
Related Information
& “Placing Originals” on page 33
& “Fax Mode” on page 19
Various Ways of Sending Faxes
Sending Faxes at a Specied Time (Send Fax Later)
You can set to send a fax at a specied time. Only monochrome faxes can be sent when the time to send is
specied.
1. Place the originals.
2. Enter Fax from the home screen.
3.
Specify the recipient.
4. Press Menu, and then select Send Fax Later.
5. Press On, enter the time to send the fax, and then press OK.
6.
Press Menu, select Fax Send Settings, and then make settings such as the resolution and the density as
necessary.
7. Press the
x button.
Note:
Until the fax is sent at the specied time, you cannot send other faxes. To cancel the fax, press the
y button on the fax
mode top screen, and then press Ye s .
Related Information
& “Sending Faxes Using the Control Panel” on page 73
& “Placing Originals” on page 33
& “Fax Mode” on page 19
User's Guide
Faxing
75