Epson WF-2660 - Page 62

3. Select Oce Mode from the Mode list.
4. Make the following settings on the Main Settings tab.
❏ Document Source: Select the document source in which you placed your original.
❏ Size: Select the size of your original.
❏ Image Type: Select the type of image you want to scan.
❏ Resolution: Select the resolution of the image you want to scan.
5.
Click Preview.
e preview window opens.
Note:
If you have place originals in the ADF, the rst page of the originals is ejected when the preview is nished. Place your
rst document page on top of the rest of the pages, and then load the entire original into the ADF.
6. Conrm the preview, and make settings on the Image Adjustment tab as necessary.
Note:
You can adjust the image such as making text enhancements.
7. Click Scan.
8. In the File Save Settings window, make appropriate settings and then click OK.
e scanned image is saved in the specied folder.
User's Guide
Scanning
62