Epson WF-7710 User Manual

54
Using WPS to Connect to a Network
Parent topic: Wi-Fi or Wired Networking
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
Note: This setting can be locked by an administrator. If you cannot access this setting, contact your
administrator for assistance.
1. Press the home button, if necessary.
2. Press the icon.
You see a screen like this:
3. Select Router > Change Settings > Push Button Setup (WPS).
4. Follow the instructions on the LCD screen to complete WPS setup.
5. Press the home button to exit.
You see the icon on the LCD screen and should be able to connect to your product directly from
your computer or device, and then print. If you are printing from a computer, make sure you installed
the network software as described on the Start Here sheet.
Note: If you don't see the icon, repeat these steps to try again.

Epson WF-7710 Specifications

General

Print Technology	Inkjet
Functions	Print, Copy, Scan, Fax
Max Print Resolution	4800 x 2400 dpi
Duplex Printing	Yes
Scanner Type	Flatbed, ADF
Scan Resolution	1200 x 2400 dpi
Display	4.3" color touchscreen
Weight	40.8 lbs
Print Speed (Black)	18 ppm
Print Speed (Color)	10 ppm
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Paper Handling	250-sheet input tray
Supported Paper Sizes	A4, A5, A6, B5, Legal, Letter
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Fax	Yes
Ink Cartridges	4 individual ink cartridges (Cyan, Magenta, Yellow, Black)