Epson WF-7720 Series - Page 156

2. Select Fax Settings > Notify Send Result.
3. Tap Notify Send Result to set this to On.
4.
Tap Recipient, and then select the recipient who will receive the notication.
Sending a Fax and Backing Up the Data
When scanning a fax, you can automatically save the scanned document to the printer's memory. is feature is
available when:
❏ sending a fax in monochrome
❏ sending a fax using the Send Fax Later feature
❏ sending a fax using the Batch Send feature
❏ sending a fax using the Store Fax Data feature
Note:
Documents that fail to be sent can also be backed up to be sent later.
1. Select Fax on the home screen.
2. Select Fax Settings > Backup.
3.
Tap Backup to set this to On.
4. Select Backup Destination, and then specify a recipient.
Related Information
& “Fax Settings” on page 189
Sending a Fax with a Subaddress(SUB) and Password(SID)
You can send a fax to the condential box or the relay box of the recipient's fax machine. Recipients can receive the
fax securely, or send the fax to
specied
forwarding destinations.
To use this feature, you must register the recipient with a subaddress and password to Contacts before you send
the fax.
Select Fax on the home screen. Select Contacts and select a recipient with a registered subaddress and password.
You can also select the recipient from Recent if it was sent with a subaddress and password.
Sending Faxes On Demand (Using Polling Send/Bulletin Board Box)
Using the Polling Send feature, you can store up to 100 pages of a single document in monochrome for polling fax.
e
stored document is sent upon request from another fax machine that has a polling receive feature.
Up to 10 bulletin boards are also available. Note that the fax machine of the recipient must support the subaddress/
password feature.
User's Guide
Faxing
156