Epson WF-7720 Series - Using an Email Server

❏ Scan to Network Folder/FTP
❏ Scan to Email
❏ Scan to Computer
❏ Scan to Memory Device
❏ Scan to Cloud
❏ Copy Settings
❏ Fax
Saving Power
e printer enters sleep mode or turns o automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will aect the product's energy eciency. Please
consider the environment before making any change.
Depending on the location of purchase, the printer may have a feature that turns it o automatically if it is not
connected to the network for 30 minutes.
Saving Power - Control Panel
1. Select Settings on the home screen.
2. Select General Settings > Basic Settings.
3. Do one of the following.
❏ Select Sleep Timer or Power O Settings > Power O If Inactive or Power O If Disconnected, and then
make settings.
❏ Select Sleep Timer or Power O Timer, and then make settings.
Note:
Your product may have the Power O Settings or Power O Timer feature depending on the location of purchase.
Using an Email Server
To use email features, you need to congure the email server.
Conguring Mail Server
Check the following before conguring the email server.
❏ e printer is connected to the network.
❏
e
email server information, such as the documents from your service provider that you used to setup the
email on your computer.
Note:
If you use a free email service, such as Internet email, search the Internet to get the email server information you need.
User's Guide
Preparing the Printer
71