ake sure to weake sure to we
s to avoid injs to avoid inj
with sharp edges.with sharp edges.
e the specified torque the specified torqu
e when tightenine when tightenin
Be extremely carefuBe extremely carefu
l not to scratch l not to scratch
or contaminate the or contaminate the
following parts.following parts.
Nozzle plate of the print headNozzle plate of the print head
Coated surface of the PF RollerCoated surface of the PF Roller
Scanner SensorScanner Sensor
Exterior partsExterior parts
Never use oil or grease other than Never use oil or grease other than
those specified in this manual. Use of diffthose specified in this manual. Use of diff
erent types of oil or grease mayerent types of oil or grease may
damage the component or give bad influence on damage the component or give bad influence on
the printer function.the printer function.
specified amount specified amount
described in described in
specified adjustments specified adjustments
disassemble the pdisassemble the p
When cleaning this When cleaning this
product, follow thproduct, follow th
e procedure de procedure d
escribed in this manuescribed in this manu
When transporting this prodWhen transporting this prod
uct after filling the ink in the pruct after filling the ink in the pr
int head, pack the printer withouint head, pack the printer withou
t removing thet removing the
ink pack in order to prevent the ink pack in order to prevent the
print head from drying out. In addition, make sure print head from drying out. In addition, make sure
to secure the CR Unit to secure the CR Unit
tape before packing the printertape before packing the printer
"5.2 Protection for Transportation (p330)""5.2 Protection for Transportation (p330)"
Make sure to inMake sure to in
stall antivirus software in thstall antivirus software in th
e computers used e computers used
for the service sufor the service su
pport activities.pport activities.
irus pattern firus pattern f
irus software upirus software up