Epson WorkForce 600 Series - Restoring, Cropping, or Copying Photos

Restoring, Cropping, or Copying Photos 11
8. To change print settings, press
Menu and then OK
to select
Paper and Copy Settings. The Layout
setting should be
With Border and the Paper Size
should be
Letter.
■ To adjust the copy size, press d to select
Reduce/Enlarge, press r, then press u or d to
choose
Actual (and select a percentage using +
or
–), Auto Fit Page (to automatically size the
image to fit your paper), or one of the specific
sizes listed. Then press
OK.
Note:
If you’re using the Auto Document Feeder to copy a document, you can only
select Actual at 100% or Legal –> Letter.
■ Press d to scroll down to the Paper Type setting and select Plain Paper.
■ For the Document Type setting, choose Text for plain documents or
Text & Image if your document contains photos or graphics.
■ To change the copy quality (for plain paper only), select Quality, press r,
then press
u or d to choose Draft, Standard Quality, or Best. Press OK.
9. After you finish selecting your settings, press
OK.
10. Press
x Start to begin copying. To cancel copying, press y Stop/Clear
Settings
.
Restoring, Cropping, or Copying Photos
You can copy one or two photos onto 4 × 6-inch, 5 × 7-inch, or letter-size photo
paper for instant photo reprints. You can also restore colors in faded photos, print
with or without borders, convert photos to black and white, and crop your photos.
1. Place one or two photos on the scanner glass. Place them at least 1/4 inch
(5 mm) apart.
2. Load 4 × 6-inch, 5 × 7-inch, or letter-size Epson photo paper in the sheet
feeder.