Epson WorkForce 633 - Fax Mode Menu List

70
Fax Send Settings Resolution, Contrast, 2-Sided Scanning *¹,
Set As New Default
Speed Dial Setup Create, Edit, Delete
Group Dial Setup Create, Edit, Delete
Fax Print Settings Auto Reduction *², Last Transmission
Report *³
Communication Dial Mode *⁴, DRD *⁵, ECM *⁶, V.34 *⁷, Rings to
Answer *⁸, Dial Tone Detection *⁹
Check Fax Connection
Header Fax Header, Your Phone Number
Send Fax Later O, On
Broadcast Fax
R & 59
Pollrecv
R & 67
Fax Report Fax Log *¹⁰, Last Transmission *¹¹, Speed
Dial List, Group Dial List, Reprint Faxes *¹²,
Protocol Trace *¹³
Maintenance
R & 88
*1 Depending on the model, this function may not be available.
R & 7
*2 Indicates whether or not to reduce received faxes larger than
A4-size to A4, or prints them at their original size on multiple
sheets.
*3 Indicates whether or not to print a report for the previous
transmitted fax. Select On Error to print reports only when
an error occurs. Select On Send to print reports for every fax.
*4 Indicates the type of phone system to which this product is
connected. Depending on the region, this menu may not be
displayed.
*5 Indicates the type of answer ring pattern you want to use to
receive faxes. To select an option other than All (or O), you
must set up your phone system to use dierent ring patterns.
This option may be On or O depending on the region.
*6 Indicates whether or not to use Error Correction mode to
automatically correct fax data sent/received with errors due
to the line or any other problems. Color faxes cannot be
sent/received when ECM is o.
*7 Indicates the speed at which you transmit and receive faxes.
On is 33.6 kbps and O is 14.4 kbps.
*8 Depending on the region, this setting may not be displayed.
*9 When this is set to
On, the product starts dialing after it
detects a dial tone. It may not be able to detect a dial tone
when a PBX (Private Branch Exchange) or a TA (Terminal
Adapter) is connected. In that case, set to O. However,
doing so may drop the rst digit of a fax number and send
the fax to the wrong number.
*10 Prints or displays the communication log.
*11 Prints a communication log for the previous transmission or
the previous polling results received.
*12 Reprints from the latest fax received. When the memory is
full, the oldest faxes are erased rst.
*13 Prints the protocol for the latest communication.
Fax Mode Menu List
x Fax Menu
Menu items and values may dier depending on the region.