Epson WorkForce 633 - Scanning to a Computer

74
When scanning both sides of an
original, load the original in the
ADF in step A, press x to make
2-Sided settings as Scan settings
in step D. The 2-Sided menu is the
same as the menu displayed when
you press .
Depending on the model, this may
not be available. R & 7
Q
After selecting a PC, your
computer’s scanning software
automatically starts scanning. For
details, see the online User’s Guide.
Q
A R & 20 B
C
Place original horizontally. Enter the scan mode.
Select an item.
Scanning to a
Computer
Make sure you have installed
software for this printer on
your computer and connected
following the instructions on the
Start Here poster.
Q
D
Select your pc.