EasyManua.ls Logo

Epson WorkForce WF-2010W - Page 17

Epson WorkForce WF-2010W
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note:
Fan and align the edges of the paper before loading.
The printable side is often whiter or brighter than the other side.
Always load paper into the rear paper feed short edge first, even when you are printing landscape -oriented
pictures.
You can use the following sizes of paper with binding holes: A4, A5, A6, Legal, Letter. Load only 1 sheet of paper
at a time.
When loading envelopes, load the short edge first with the flap facing down.
Do not use envelopes that are curled, folded, or glued or that have plastic windows.
Flatten the envelope and the flaps before loading.
Flatten the leading edge of the envelope before loading.
Avoid using envelopes that are too thin, as they may curl during printing.
D
Slide the edge guide against the left edge of the paper, but not too tightly.
Note:
For plain paper, do not load paper above the H arrow mark inside the edge guide.
For Epson special media, make sure the number of sheets is less than the limit specified for the media.
& “Selecting Paper” on page 13
User’s Guide
Paper and Media Handling
17

Table of Contents

Related product manuals