EasyManua.ls Logo

Epson WorkForce WF-2010W - Network Interface Specification; Mechanical

Epson WorkForce WF-2010W
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Minimum margin
Media type Single sheets Envelopes
A 3.0 mm (0.12 in.) 3.0 mm (0.12 in.)
B 3.0 mm (0.12 in.) 5.0 mm (0.20 in.)
C 3.0 mm (0.12 in.) 21.0 mm (0.83 in.)
Note:
Depending on the type of paper, print quality may decline in the top and bottom areas of the print, or the area may be
smeared.
Network interface specification
Wi-Fi Standard:
IEEE 802.11b/g/n
*1
Security: WEP (64/128bit)
WPA-PSK (TKIP/AES)
*2
Frequency Band: 2.4 GHz
Communication Mode: Infrastructure mode,
Ad hoc mode
Ethernet Standard:
IEEE802.3i/u, IEEE802.3az
*3
Communication Mode: Ethernet 100BASE-TX/10BASE-T
*1 Complies with either IEEE 802.11b/g/n or IEEE 802.11b/g depending on location of purchase.
*2 Complies with WPA2 with support for WPA/WPA2 Personal.
*3 The connected device should comply with IEEE802.3az.
Mechanical
Dimensions
Storage
Width: 392 mm (15.4 inches)
Depth: 264 mm (10.4 inches)
Height: 148 mm (5.8 inches)
Printing*
Width: 392 mm (15.4 inches)
Depth: 530 mm (20.9 inches)
Height: 296 mm (11.7 inches)
Weight
Approx. 3.2 kg (7.1 lb) without the ink cartridges and the power cord.
* With the output tray extension extended.
User’s Guide
Product Information
77

Table of Contents

Related product manuals