ADF - Double-sided
Selects the Automatic Document Feeder as the location where the originals are placed on your
product for double-sided scanning.
Document Table
Selects the scanner glass as the location where the originals are placed on your product for scanning.
Parent topic: Scanning in Office Mode
Selecting a Scan Area - Office Mode
You can select a specific area in your preview image to include in your scanned image. You can select
the entire image area or a portion of it. You can even select multiple scan areas to create multiple
scanned images of different areas.
You can also use the scan area to select specific Image Adjustments settings for a scanned image. Just
be sure to click inside the scan area before selecting the settings.
110
To Next Page
Loading...
