Epson WorkForce WF-3530 User Manual

Using an External Device with Your Product
Follow the instructions in these sections to use your product with an external device, such as a camera,
USB flash drive, or other device.
Printing from a Camera Connected to Your Product
Viewing or Printing from a USB Flash Drive or External Device
Charging a USB Device Using Your Product
Printing from a Camera Connected to Your Product
If you have a digital camera that supports PictBridge printing, you can connect it to the product and print
your photos directly from the camera. Check your camera manual to see if it is compatible.
Note: Your photos must be in JPG format and sized from 80 × 80 to 9200 × 9200 pixels. Epson cannot
guarantee the compatibility of your camera. Some combinations of paper type, size, and layout may not
be supported, depending on your camera and the product settings.
Selecting Print Settings for Printing From a Camera
Connecting and Printing From a Camera
Parent topic: Using an External Device with Your Product
Selecting Print Settings for Printing From a Camera
Before printing from your camera, you can select the print settings you will use for printing your photos.
1. Press the home button, if necessary.
2. Select Setup, then press OK.
3. Select External Device Setup, then press OK.
You see this screen:
213

Epson WorkForce WF-3530 Specifications

Print Specifications

maximum print resolution	5760 x 1440 optimized dpi
ISO print speed black	15.0 ISO ppm
ISO print speed color	9.3 ISO ppm

Copy Specifications

ISO copy speed black	13.0 ISO ppm
ISO copy speed color	7.1 ISO ppm
maximum copy size	8.5" x 14"

Scan Specifications

maximum hardware resolution	2400 dpi
hardware resolution	1200 x 2400 dpi
maximum resolution interpolated	9600 dpi

Fax Specifications

modem speed	33.6 Kbps
fax memory	up to 180 pages
speed dials	100 (max.)

Connectivity

standard connectivity	Hi-Speed USB
wireless connectivity	802.11 b/g/n
wired Ethernet	10/100 Mbps

Paper Handling

maximum paper size	8.5" x 44"
input paper capacity	500 sheets plain paper
automatic document feeder capacity	30 sheets

General Specifications

operating temperature	50 ° to 95 °F (10 ° to 35 °C)
storage temperature	-4 ° to 104 °F (-20 ° to 40 °C)
sound level	37 dB(A)

Power

rated voltage	AC 120 V
rated frequency	50 – 60 Hz
rated current	0.7 Amp

Weight and Dimensions

dimensions printing	17.7" x 22.2" x 12.1"
dimensions storage	17.7" x 16.8" x 12.1"
weight	24.0 lb