EasyManua.ls Logo

Epson WorkForce WF-3530 - Loading Envelopes in the Cassette

Epson WorkForce WF-3530
325 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note: The paper may slide forward slightly as you insert the cassette. This is normal.
8. Extend the output tray and open the paper stopper.
Note: If you are using legal-size or longer paper, do not open the paper stopper. Do not remove or
insert the paper cassette during printing.
Always follow these paper loading guidelines:
Load only the recommended number of sheets.
Load paper short edge first, no matter which way your document faces.
Load the printable side facedown.
Do not load paper above the arrow mark inside the edge guide.
Check the paper package for any additional loading instructions.
Parent topic: Loading Paper
Related references
Paper Loading Capacity
Loading Envelopes in the Cassette
You can print on plain paper envelopes in this size: No. 10 (4.1 × 9.5 inches [105 × 241 mm]). If your
product has two paper cassettes, you can load No. 10 size envelopes in Cassette 1 only.
40

Table of Contents

Other manuals for Epson WorkForce WF-3530

Related product manuals