7. Press either of the buttons.
Note: If your recipient's fax machine does not print in color, your fax is automatically sent in black-
and-white. To cancel faxing, press the Stop/Reset button.
Your product scans your original and prompts you to place additional pages, if necessary.
After scanning your originals, your product dials the number and sends the fax.
Note: If the number is busy or there is a communication problem, your product displays a redialing
message and will redial the number in a few minutes.
Parent topic: Sending Faxes from the Product Control Panel
Related references
Fax Sending Options
Related topics
Placing Originals on the Product
Setting Up Speed/Group Dial Lists Using the Product Control Panel
Dialing Fax Numbers from a Connected Telephone
If you have connected a telephone to the EXT. port on your product, you can send a fax by dialing the
fax number from the connected telephone.
1. Place your original on the product for faxing.
2. Press the home button, if necessary.
186
To Next Page
Loading...
