9. Prepare to pack the printer as shown below.
10. Pack the printer in its box, using the protective materials.
When you use the printer again, make sure you remove the tape securing the ink cartridge holder. If print quality
has declined the next time you print, clean and align the print head.
Related Information
& “Part Names and Functions” on page 12
& “Checking and Cleaning the Print Head” on page 72
& “Aligning the Print Head” on page 74
Accessing a Memory Card From a Computer
You can write or read data on an external storage device such as a memory card that has been inserted in the
printer from a computer.
c
Important:
❏ Insert a memory card aer removing write protection.
❏ If an image is saved to the memory card from a computer, the image and the number of photos are not refreshed
on the LCD screen. Remove and insert the memory card again.
❏ When sharing an external device inserted in the printer between computers connected over USB and over a
network, write access is only allowed to the computers that are connected by the method you selected on the
printer. To write to the external storage device, enter Setup on the control panel and select File Sharing and a
connection method. Data can be read by computers connected over USB and over a network.
❏ To write to the external storage device connected to the computer over a network, enter Setup on the control
panel and select File Sharing and Write access from Network.
Note:
It takes a while to recognize data from a computer if a large external storage device, such as 2TB HDD, is connected.
User's Guide
Appendix
114
To Next Page
Loading...
Need help?
General
