Epson XP-420 SERIES User Manual

Code Situation Solutions
Recovery
Mode
The printer has started in recovery
mode because the
rmware
update
failed.
Follow the steps below to try to update the rmware again.
1. Connect the computer and the printer with a USB cable. (During
recovery mode, you cannot update the rmware over a network
connection.)
2. Visit your local Epson website for further instructions.
* In some print cycles a very small amount of surplus ink may be collected in the ink pad. To prevent ink leakage
from the pad, the printer is designed to stop printing when the pad has reached its limit. Whether and how
oen
this is required will vary according to the number of pages you print, the type of material that you print and the
number of cleaning cycles that the printer performs. e need for replacement of the pad does not mean that your
printer has ceased to operate in accordance with its
specications. e
printer will advise you when the pad
requires replacing and this can only be performed by an authorised Epson Service provider.
e
Epson warranty
does not cover the cost of this replacement.
Related Information
&
“Contacting Epson Support” on page 115
&
“Removing Jammed Paper” on page 92
&
“Installing Applications” on page 88
& “Updating Applications and Firmware” on page 89
Checking the Printer Status - Windows
1. Access the printer driver window.
2. Click EPSON Status Monitor 3 on the Maintenance tab.
Note:
❏ You can also check the printer status by double-clicking the printer icon on the taskbar. If the printer icon is not
added to the taskbar, click Monitoring Preferences on the Maintenance tab, and then select Register the shortcut
icon to the taskbar.
❏ If EPSON Status Monitor 3 is disabled, click Extended Settings on the Maintenance tab, and then select Enable
EPSON Status Monitor 3.
Related Information
& “Windows Printer Driver” on page 78
Checking Printer Status - Mac OS X
1.
Select System Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer.
2. Click Options & Supplies > Utility > Open Printer Utility.
3. Click EPSON Status Monitor.
User's Guide
Solving Problems
91

Epson XP-420 SERIES Specifications

General

Print Technology	Inkjet
Max Print Resolution	5760 x 1440 dpi
Connectivity	Wi-Fi, USB
Scanner Type	Flatbed
Max Scan Resolution	1200 x 2400 dpi
Display	2.5" color LCD
Printer Type	All-in-One
Functions	Print, Scan, Copy
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Input Paper Capacity	100 sheets
Paper Sizes	Letter, Legal, Envelopes
Operating System Support	Windows, Mac
Print Speed Black	9 ppm
Print Speed Color	4.5 ppm
Weight	9 lbs
Ink Cartridges	4 (Black, Cyan, Magenta, Yellow)