Epson XP-420 SERIES User Manual

❏ Envelopes
❏ Pre-punched paper
Note:
❏ Load a single sheet of paper without binding holes at the top or the bottom.
❏ Adjust the print position of your le to avoid printing over the holes.
4. Slide the edge guide to the edge of the paper, and then close the feeder guard.
5. Check the current paper size and paper type settings displayed on the control panel. To use the settings, select
Do Not Change using the
u or d button, press the OK button, and then go to step 7. To change the settings,
select Change using the
u or d button, press the OK button, and then go to the next step.
c
Important:
e
paper setup screen is not displayed if the paper is not loaded along the right side of the rear paper feed. An
error occurs when you start printing.
Note:
If you have disabled the Paper Conguration setting, the paper setting screen is not displayed. Go to step 7.
User's Guide
Loading Paper
24

Epson XP-420 SERIES Specifications

General

Print Technology	Inkjet
Max Print Resolution	5760 x 1440 dpi
Connectivity	Wi-Fi, USB
Scanner Type	Flatbed
Max Scan Resolution	1200 x 2400 dpi
Display	2.5" color LCD
Printer Type	All-in-One
Functions	Print, Scan, Copy
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Input Paper Capacity	100 sheets
Paper Sizes	Letter, Legal, Envelopes
Operating System Support	Windows, Mac
Print Speed Black	9 ppm
Print Speed Color	4.5 ppm
Weight	9 lbs
Ink Cartridges	4 (Black, Cyan, Magenta, Yellow)