140
You see a screen like this:
5. Select OK to close the information screen, if necessary.
6. Select Select a computer and choose one of the following options:
• If your computer is connected to your product over a network, select a connected computer from
the displayed list. (If the computer is not listed, select Search Again.)
• If your computer is connected to your product using a USB cable, select USB Connection.
7. Select Save as PDF and choose one of the following options:
• Save as JPEG to save the scanned scanned image as a JPEG file.
• Save as PDF to save the scanned document or image as a PDF file.
• Attach to email to open the default email software on your computer and save the scanned
document or image as a JPEG email attachment.
• Follow custom setting to save the scanned document or image using custom settings you have
selected using the Event Manager custom scan settings option.
Note: You can customize the settings for each of the options above using Event Manager.
8. Select 1-sided and select whether or not you want to scan both sides of the original.
9. Select Save to start scanning.
Parent topic: Starting a Scan Using the Product Control Panel
Scanning to the Cloud
You can use the control panel to send your scanned files to a destination that you have registered with
Epson Connect.
To Next Page
Loading...
