QX50/QX200/QX2000; (SW Version 6.0.x) 180
QX50/QX200/QX2000 Manual II: Administrator’s Guide
Parameter System Default Value
Address-empty
Recording Type – Always start automatically
Max Recording Duration – 1 hour
Recording To – same as extension number
Description – empty
NAT Traversal Settings
NAT Traversal for SIP – Automatic
SIP and RTP Parameters – Use STUN
SIP TCP Port – 5060
STUN Parameters:
Primary STUN Server – stun.epygi.com
Primary STUN Port – 3478
Secondary STUN Server – undefined
Secondary STUN Port – undefined
Polling Interval: 1 hour
Keep-alive interval: 120 seconds
NAT IP checking interval: 300 seconds
No entries in NAT Exclusion table
RTP Settings
Properties for all Codecs except iLBC, G.722, G.722.1, TDVC :
Packetization -20ms
Silence Suppression – yes
iLBC properties:
Packetization – 30ms
Silence Suppression – yes
G.722, G.722.1, TDVC properties-undefined
G.726 Standard – ITU-T specification
RTP/RTCP port range – 6000-6255
RTCP Support – disabled
SIP Settings
UDP and TCP Port – 5060
TLS Port-empty
Realm – epygi
Session Timer – disabled
DNS Server for SIP – default
SIP timers – RFC 3261
Host Aliases for SIP – undefined
Voice Mail Common Settings
Voice Mail Recording - G729a
Email Subject for voice - Voice mail received from $[VM_DISPNAME] $[VM_USERNAME]
FAX to E-mail format – TIFF
Gain Control Settings
(for QX50/QX200)
FXS lines:
Transmit Gain: - 6
Receive Gain: 0
FXO lines:
Transmit Gain: 0
Receive Gain: 6
Voice Mail:
Recording Gain: 0
Playback Gain: 0
Audio Lines:
Transmit Gain(Line out): Off
Receive Gain(Line in): Off
Gain Control Settings
(for QX2000)
Voice Mail:
Recording Gain: 0
Playback Gain: 0
Secure Connection – disabled
Request Timeout – 10
Feature Key – not added
WAN Port – not opened.
Call Quality Notification
Firewall
(for QX50/QX200)
Enable Firewall – disabled
Enable IDS – enabled
Enable NAT - enabled
Ping Stealth – enabled