QX50/QX200/QX2000; (SW Version 6.0.x) 36
QX50/QX200/QX2000 Manual I: Installation Guide
•
•
Polycom SoundPoint IP 450SIP*
•
•
•
Polycom SoundPoint IP 501SIP
•
•
•
Polycom SoundPoint IP 550SIP*
•
•
•
Polycom SoundPoint IP 601SIP
•
•
•
Polycom SoundPoint IP 650SIP*
•
•
•
Polycom SoundStation IP 5000*
•
•
•
Polycom SoundStation IP 6000*
•
•
•
•
•
•
•
• Yealink VP-2009/
VP-2009P
•
•
POLYCOM KIRK wireless server
6000
•
•
•
POLYCOM KIRK wireless server
300
To use Plug and Play (PnP) option for IP phones, connect them to LAN/WAN for the QX IP PBX
and power up. If the phone is in default settings then it will automatically select a free IP line
and attach to an extension. If not, reset the phone to factory defaults manually.
Please Note: To use PnP the appropriate option should be selected in the Interfaces - IP
Lines – IP Line Settings page.
Please Note: In the model’s list the Polycom phones with (*) sign are also presented as Poly-
com-xx-Pre-3.3.0 due to backward incompatibility of UCSoftware 3.1.1 configuration. It is
recommended to use Pre-3.3.0 models with Application SIP software 3.2.2.0477.
To Next Page
Loading...
