This document describes the equip Barcode Scanner 251023, a wireless 1D laser barcode scanner designed for efficient data entry and storage. It offers a complete solution for accurate, easy-to-use, and fast computer information system operations, featuring an infrared automatic sensing technology. The product supports various interfaces and provides comprehensive settings for customization.
Function Description
The equip Barcode Scanner 251023 is primarily used for scanning 1D barcodes. It can operate in both wired and wireless modes, offering flexibility for different environments. The device supports various barcode types and provides extensive options for configuring how barcodes are read, processed, and outputted.
Key functions include:
- Barcode Scanning: Reads all one-dimensional barcodes.
- System Initialization: Resets all parameters to factory settings (902000 barcode).
- Software Version Display: Shows the current software version (000011 barcode).
- Sound Settings: Configures the buzzer sound (open/close, pitch/loudness adjustment).
- Transmission Mode: Sets the communication interface (USBHID, PS/2, UART, VCOM).
- Laser Trigger Mode: Defines how the laser is activated (key trigger, pulse trigger, continuous scan, flicker mode).
- Laser Duration: Adjusts the duration of the laser scan (from 1 to 9 seconds, or continuous).
- Self-Sensing Option: Enables or disables automatic scanning when a barcode is detected.
- Barcode Identification Interval: Sets the delay time between consecutive scans in continuous scanning mode.
- Barcode Output Validation Level: Adjusts the confirmation level for barcode output, affecting reading speed and error rate.
- Barcode ID Identification Option: Adds a 1-bit letter ID before the barcode to identify its type.
- Keyboard Language: Supports 23 different keyboard languages for output.
- Character Interval: Sets the delay between characters during data transmission.
- Serial Communication Option: Configures porter rate, handshake agreement, and data bits for serial communication.
- Large/Lower Case Conversion: Converts alphabetic characters in the barcode output to large or lowercase.
- Reverse Color Image Reading: Reads barcodes from white background on black bars or black background on white bars.
- Full-Code Reading: Allows identification of all one-dimensional barcodes.
- Advanced Setting Options: Includes adding/deleting prefixes/suffixes, barcode ID settings, and character local/global settings.
Important Technical Specifications
The manual does not explicitly list all technical specifications such as battery life, scan speed, or physical dimensions. However, it implies the following:
- Barcode Type: 1D Laser Barcode Scanner.
- Wireless Technology: Wireless 1D, with a 2.4G mode for pairing.
- Interfaces: Keyboard, RS-232, USBHID, VCOM.
- Supported Barcodes: UPC-A, EAN-13, EAN-8, UPC-E, CODE39, CODE128, CODE93, Cross 25-yard, Industrial 25, China Post 25, Standard 25, Matrix 25, Kudeba, MSI, CODE11, RSS (RSS-14, RSS-Limited, RSS-Expanded).
- Keyboard Layouts: Supports various national keyboard layouts including US, Belgium, Brazil, Canada, Czech, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Japan, Netherlands, Norway, Portugal, Russia, Spain, Sweden, Switzerland, Turkey.
- Laser Duration: Configurable from 1 to 9 seconds, or continuous.
- Barcode Identification Interval: Configurable from 2 to 50 milliseconds (default 5ms).
- Serial Communication Porter Rates: 1200, 2400, 4800, 115200, 19200, 38400.
- Serial Communication Data Bits: 7 or 8 bits.
- Character Interval: Default 10ms, configurable from 1 to 99ms.
- Maximum/Minimum Information Length: Configurable for various barcode types (e.g., CODE39 default max 80, min 2; CODE128 default max 80, min 1).
Usage Features
The scanner is designed for ease of use and extensive customization to fit various application needs.
- Plug and Play: The brief introduction suggests a straightforward setup process.
- Automatic Sensing: Infrared automatic sensing technology allows for hands-free scanning.
- Configurable Settings: Almost every aspect of the scanner's operation can be configured by scanning specific barcodes provided in the manual. This includes:
- System Initialization: A quick way to revert to default settings.
- Sound Customization: Adjusting buzzer sound for feedback.
- Interface Selection: Easily switch between different computer interfaces.
- Trigger Modes: Adapt to different scanning workflows (e.g., continuous for high-volume scanning, key trigger for precise control).
- Laser Duration Control: Optimize power consumption and scanning performance.
- Barcode Type Enable/Disable: Activate only the necessary barcode types to prevent misreads.
- Data Formatting: Add prefixes/suffixes, convert case, and adjust character intervals to match specific data entry requirements.
- Error Correction: Options for checksum output and verification for certain barcode types.
- Language Support: Ensures compatibility with various international keyboard layouts.
- Memory Storage: Settings are stored in memory and retained even after power is turned off.
- Wireless Operation: Provides freedom of movement and reduces cable clutter.
- Barcode ID: Allows for easy identification of different barcode types in the output.
Maintenance Features
The manual provides several features related to the maintenance and troubleshooting of the device.
- Factory Reset: The "System initialization settings" barcode (902000) allows users to easily reset the scanner to its default factory configuration, which is useful for troubleshooting or reconfiguring the device.
- Firmware Information: The "Display the software version number" barcode (000011) helps in identifying the current firmware version, which can be important for support or updates.
- Wireless MCU Function Setting: Includes options for "Ordinary mode," "Inventory mode," "Data upload," and "Clear data," which are crucial for managing data in wireless operation.
- Inventory Mode: Allows storing scanned barcodes in internal memory.
- Data Upload: Transfers stored data from the scanner's memory to the computer.
- Clear Data: Erases all data stored in the internal memory.
- Show Remaining Power: A barcode (%Batt) is provided to display the remaining battery power, helping users manage charging cycles.
- One Key Pairing: The "%EZPair" barcode simplifies the pairing process for wireless operation.
- Bluetooth Name Modification: Allows changing the Bluetooth name of the scanner, which can be useful in environments with multiple scanners.
- Inventory Capacity Setting: The "%FlashNormal" and "%FlashALL" barcodes allow users to check the storage capacity of the scanner.
- Barcode Scanner ID Settings: Users can display or hide the scanner's ID, which might be useful for identification in multi-scanner setups.
- Standby Time Setting: Configurable standby time (from 20 seconds to 5 minutes) helps in power management.
- Wireless Function Recovery Factory: The "%Restore" barcode allows resetting wireless functions to factory defaults.
- Receiver/Scan Gun Version Number: Barcodes are provided to display the version numbers of both the receiver and the scan gun, aiding in troubleshooting and support.
- Detailed User Manual: The manual itself serves as a comprehensive guide for all settings and troubleshooting steps, with clear explanations and barcode examples for each configuration.
- Customer Support: The document provides contact information (support.eu@equip-info.net, support.asia@equip-info.net) for further assistance.
- Online Resources: A link to the equip website (https://www.equip-info.net/) is provided for more information and potentially updated manuals.
Need help?
General
To Next Page