Open * Close
(9) CODE39 code reading code maximum and minimum
information length setting (D)
Set the Code 39 maximum information length (the default value is 80)
Set the Code 39 minimum information length (the default value is 2)
2.6 CODE128 setting options
(1) The corresponding barcodes for the opening and closing of
reading enabling are as follows.
* Open Close
(2) The opening and closing of GS1-128 (UCCEAN128) code
reading enable are as follows.
Open * Close
（3）CODE128 Code reading code maximum and minimum
information length setting (D)
To Next Page
Loading...