(3) Convert UPC-E codes to EAN-13 and UPC-A codes.
EAN-13 on UPC-A open
*Close
(4) Opening and closing of the UPC-E system character
transmission enable.
* Open Close
2.5 CODE39 code setting options
(1) The corresponding barcodes for the opening and closing of
reading enabling are as follows.
* Open Close
（2）The barcodes corresponding to the checksum output check
characters are shown as follows respectively.
* Do not check Verifies but does not output a verifier
Verify and output check characters
To Next Page
Loading...