Start the keyboard language settings
* Standard American Keyboard German keyboard
1.13-character interval (D) (wired gun)
Used to set the delay between characters and character of data
during transmission. When the barcode gun scans the following
001022 barcode, the corresponding data code enters the
corresponding delay (see Appendix C for data code) after scanning
the data code, remember to scan the save code. The default delay
between characters is 10ms.
Start-character interval setting (default 1 in 1 ms, range 1-99)
* 1 ms 10 ms
20 ms 40 ms
To Next Page
Loading...