1.Basic property settings for the scanning gun
1.1 System initialization settings
After system initialization, all parameters are restored to the
factory setting, and the following 902000 barcode must be
scanned. The respective initialization parameters are detailed in
Appendix A.
System initialization settings
1.2 Display the software version number
When the barcode gun scan as above 000011 barcode success, the
corresponding position on the computer screen will display the
corresponding software version number.
Displays the software version number
1.3 Sound Settings options
(1) Sound on and off
When the barcode gun scans below 002001 bar code, the system
will turn on the buzzer. When the barcode gun scans below
002000 barcode successfully, the system will turn off the buzzer.
To Next Page
Loading...