1.10 Barcode output validation level (wired gun)
Some bar codes need to be confirmed repeatedly before the output
to avoid the wrong code. The lower the confirmation level, the
faster the barcode reading speed, the higher the error rate. The
higher the confirmation level, the slower the bar code reading
speed, and the lower the code error rate.
*Level Zero Grade 1
1.11 Barcode ID identification option (wired gun)
affects the reading setting code when the
wireless gun is opened
The barcode ID is used to identify the identity of the barcode and
is indicated by a 1-bit letter. Barcode gun can scan the following
bar code to achieve this function.
ID before barcode * ID before barcode
1.12 Keyboard language (D) (wired gun)
The language type used to set the output barcode to the computer
supports 23 languages, please see Table 1 for the 23 countries
respectively. The corresponding bar codes of the United States and
Germany are as follows.(After the barcode gun scans the
following 102000 barcode, the corresponding data code will enter
To Next Page
Loading...