Set the Code93 minimum information length (the default value is 3)
2.8 Cross 25-yard setting options
(1) The corresponding bar code for opening and closing of reading
enabling is as follows.
Open *Close
(2) The barcodes corresponding to the checksum output check
characters are as follows.
* Not not check Verifies but does not output a verifier
Verify and output check characters
(3) Setting of cross 25 codes (D)
Set ITF 25 maximum information length (default value 80)
Set the ITF 25 minimum information length (default value 6)
To Next Page
Loading...