（8）replace
The character replacement function is to replace the
specified characters with the target characters. For
example, when resolving the bar code to 1234ABCD90, now
to replace the ABCD is 5678, then the output 1234567890.
Barcode production: 02A00000 05 4 ABCD 5 56789
The character replaced by the leading command, is long
The global / local code degree agrees with the length specified
previously
The length of the character being replaced, Replaced character
length
The range is from 1 to 9. The placed character,
length is with
The previously
specified previously.
The function of the above command is to replace the
character ABCD in the CODE-39 code with 56789.
Reset barcode production: 0B2A0 05
The leading command Global / Local code
(9) Front / suffix added function
The suffix refers to control characters that cannot
be displayed, such as return, change, F2, F3 and so on.
Specific characters and corresponding functional
characters refer to the appendix, allowing up to 3
prefixes and suffixes.
（a）Add prefix
To Next Page
Loading...