Ergon CF3 - Saddle Clamp Tightening Torque

45
ERGON BIKE ERGONOMICS
EN
Tighten the clamp using torque of between 4 and 5 Nm. Never exceed the
maximum torque of 5 Nm (Fig. D) or the saddle manufactures
recommendations. Pay particular attention to the information about the
compatibility of the Flip Head Saddle Clamp with different rails on page 57.
max. 5 Nm
Fig. D: Tighten the clamping screws to 4 - 5 Nm.Fig. C: Position the Flip Head outer clamps and
loosely tighten the clamping screws.