We recommend using the previous saddle position you had (in terms of tilt,
height and fore aft (horizontal) position) before installing the CF3 seatpost.
Generally speaking a saddle should be level. This prevents the rider slipping
forwards or backwards. It also prevents too much pressure being applied either
front or rear. It is also recommended that the saddle is completely straight in line
with the frame. This allows the rider to apply equal load to the widest part of the
saddle where the sit bones are supported. If the rider finds themselves sitting too
far forward, then the fore / aft adjustment should be adjusted accordingly, or tilt
the saddle back fractionally.
Tip: Angle of the saddle
Fig: Level-Method
0° Angle of inclination
in the center of the saddle
To Next Page
Loading...
