Pay attention to the compatibility of the Flip Head outer clamp and the saddle
rails used.
* Included with the seat post. Only suitable for use with round steel or titanium
rails measuring 7x7 mm (Fig. C).
** Available separately. Only for use with saddles with oval carbon rails (7x9 mm)
(Fig. D). Please pay attention to the saddle’s marked clamping area, or measure
to ensure correct fit. Tolerances of + 0.3 mm are normal. On some saddles, the
additional carbon weave on the rail clamping area can make for higher variation
from this 0.3mm tolerance.
Fig. C: Round steel or titanium rails.
Clamp size 7x7mm.
Fig. D: Oval Carbon Rails.
Clamp size 7x9 mm.
round
7x7 mm
oval
7x9 mm
Flip Head
7x7 mm*
7x9 mm**
Saddle Rail
7x7 mm
7x9 mm
Shape
round
oval
Material
Steel or Titanium
Carbon
To Next Page
Loading...
