Need help?Do you have a question about the Ericsson AVP 3000 Series and is the answer not in the manual?
General| Category | Media Converter |
|---|---|
| Model | AVP 3000 Series |
| Manufacturer | Ericsson |
| MPEG | MPEG-2 |
| Audio decoding | Dolby Digital, MPEG-1 Layer II |
| Interfaces | ASI, IP, SDI |
| Power Supply | 100-240 VAC |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
Details the rear panel connectors for signal input and output.
Introduces the web GUI and its main components (Advanced View).
Details how to configure Transport Streams, services, and components for outputs.
Describes the video encoding capabilities of the VCM module, including profiles and modes.
Details the functionality and profiles supported by various VCMs.
Outlines routine inspection, cleaning, and servicing procedures for the equipment.
Explains the types of alarms generated by control and data ports and their meanings.
Provides a fault-finding philosophy and preliminary checks for troubleshooting.
Lists alarms and failure identifiers generated by the Host Controller.
Lists alarms generated by CE-a, CE-x Pre-Processor, and CE-HEVC VCMs.
Lists alarms generated by the CE-a J2K VCM.
Lists alarms generated by the CE-xA VCM.
Lists alarms generated by the Satellite Modulator.
To Next Page
