DESCRIPTION
11
BusinessPhone 250 / BusinessPhone 50
Portable DT400 / DT410 / DT420 / DT430
SWITCHING ON/OFF
THE PORTABLE
Switch on
Press until the display lights up
If the portable does not switch on or the battery icon is
displayed, the battery is low. Charge the battery.
The display shows:
Press OK to confirm
Now you can use your portable.
Note: If the message No System is displayed you cannot make
or answer calls.
Switch off Note: During calls, you cannot switch off your telephone.
The Switch off function has to be programmed as a Hot key,
see section “Edit a Hot key”.
If you already programmed a Hot key:
Press and hold the Hot key
The display shows:
After a few seconds, the display turns blank.
Now your portable is switched off.
SSwwiittcchh oonn??
PPlleeaassee wwaaiitt
To Next Page
Loading...
