Ericsson DT400 - The Alarm

OTHER USEFUL FACILITIES
54
BusinessPhone 250 / BusinessPhone 50
Portable DT400 / DT410 / DT420 / DT430
NON-MOVEMENT
ALARM
(continued)
The display shows a small “A” in the last row. This indicates
that the Non-movement alarm is set:
Note: It is recommended to program two Hot keys to activate
and deactivate the Non-movement alarm. How to program a
Hot key, see section “Edit a Hot key”.
Cancel
Non-movement alarm
The alarm will go off when you have not moved within 30
seconds. Five seconds before the alarm is activated a warning
signal sounds and the “A” icon starts to flash.
If it is not a case of emergency, you can cancel the non-
movement alarm within this time.
Move the telephone or press any key to cancel
the alarm
The display returns to normal state:
The “A” icon on the display indicates that the non-
movement alarm is still in operation.
SSyysstteemm AA
A
SSyysstteemm AA
A