OTHER USEFUL FACILITIES
53
BusinessPhone 250 / BusinessPhone 50
Portable DT400 / DT410 / DT420 / DT430
NON-MOVEMENT
ALARM
Note: This feature is only available for the DT430. The DT420
can be fitted with an optional Non-movement alarm.
If you have not moved within 30 seconds and are unable to
raise an alarm yourself, a sensor inside the phone will alert
the operator.
To use this feature, you have to activate the Non-movement
alarm feature first. You can do this via the display menu or by
programming the function as a Hot key, see “Edit a Hot key”.
Activate
Non-movement alarm
Press to enter the menu
Select “
44 SSeettttiinnggss
” and press
Select “
88 NNoonn--mmoovveemmeenntt
” and press
The display shows:
Note: If the Non-movement alarm is already turned on, the
display will show “
OOnn
” instead of “
OOffff
”. If you want to keep
the alarm on, just press C to exit the menu without changes.
Select “
OOnn
” and press
The Non-movement alarm is set.
Press to exit the menu
(continued)
OOffff
To Next Page
Loading...
