SETTINGS
70
BusinessPhone 250 / BusinessPhone 50
Portable DT400 / DT410 / DT420 / DT430
SYSTEM Use this menu to select a system and view all telephone
related information.
Note: How to register to the system is described at the beginning
of this guide. The options “Test” and “Register” may only be
performed by the system administrator and are described in a
separate documentation.
SELECT SYSTEM When you have registered to more than one system,
you can manually select to which system to connect.
Press to enter the menu
Select “
44 SSeettttiinnggss
” and press
Select “
77 SSyysstteemm
” and press
The display changes to:
Press
The display shows:
Press
Scroll up or down to select an available system
You can connect to up to four different PBX systems with
your portable, normally named “A”, “B”, “C” and “D”.
Note: The normal setting though is “Auto”. This setting makes
the portable automatically look and connect to a system.
Press to exit the menu
Your portable is now connected to the selected system.
11 SSeelleecctt
ssyysstteemm
SSyysstteemm::
To Next Page
Loading...
