Settings 111
Parity
This allows you to change the parity checking for the serial port
communication. The options are:
None, Odd, Even, Mark or
Space.
Stop bits
This allows you to change the number of stop-bits for the serial
port communication. The options are:
1 or 2.
Character length
This allows you to change the number of bits per character for
the serial port communication. The options are:
5, 6, 7 or 8.
Flow control
This allows you to change the flow control protocol for the serial
port communication. The options are:
CTS/RTS or XON/XOFF.
Note: You cannot change the port setting while the port is in use.
Calculator
These settings allow you to configure the functionality of the
Calculator application.
Number of decimal places
You can select the number of decimal places that the calculator
displays. The options are:
Auto or a number between 0 to 9.
Keypad position
You can select where the keypad displays on the screen. The
options are:
Right or Left.
Reset Language
This setting allows you to reset the interface language to the
factory default which is English. This resets the language,
keyboard layout, time and date format, decimal symbol and
sorting order of the local settings. After selecting the Reset
language option a confirmation message displays. Tap
Yes to
continue with the reset or
No to cancel.
Note: The R380 automatically powers down after confirming the
reset. After it has completely been shut down, you may turn it back
on.
To Next Page
Loading...
