110 Settings
To create or edit an existing service providers settings:
1. From within the Extras tab, tap System and choose
Preferences.
2. Select Service providers from the list displayed in the
Preferences view. The Service providers view displays.
3. Depending on whether you are creating a new service
provider or editing an existing one, do one of the
following:
• Tap and select New service provider. The New
service provider view displays.
or
• Select the service provider to be changed. A view with
the name of the service provider appears.
4. Enter or change the required information by tapping on
the corresponding field. Depending on the field type, you
will either be provided with a text input method or a
selection list.
Tip! If you are entering text information (for example the
providers name and telephone number) use the (next) or
(previous) buttons to proceed to the next information field
or back up. When finished tap (back). The information
you entered displays. Any information that must be provided
by selecting from a dropdown can now be added. Simply tap
on the corresponding field and select the desired option from
the drop down list.
5. Tap to implement and save the new settings.
The Services providers settings view displays.
Port
These settings allow you to change different aspects of your port
configuration.
Baud rate
This allows you to change the baud rate of the serial port. The
options are:
2400, 4800, 9600, 19200, 38400, 57600 or 115200.
OK
To Next Page
Loading...
