Ericsson R380 - Page 194

194 Getting started with E-mail and WAP
4. Tap and select New WAP profile. The New WAP profile
view displays.
5. Enter the required information.
• Name: Enter a name for the gateway.
• Service provider: Select which service provider to use.
• Gateway: Enter the IP address for the WAP gateway.
• Gateway username: Enter the your username for the
gateway.
• Gateway password: Enter your password.
• Confirm password: Re-enter your password for
confirmation.
• Security: Select whether or not you want the Security
on. If
On is selected, all data sent to and from the
gateway will be encrypted. Default is
Off.
• Connection mode: Select the connection type: either
Connectionless or Connection oriented.
6. To set the gateway as the current (default) gateway, tap
and select
Set as current.
7. Tap to implement and save the new settings. The
display returns to the WAP profile view.
Note: Although supported, the
User Id. and Password are
not always necessary and can be left empty.
Using WAP for the First Time
To use WAP for the first time:
1. Tap Browser on the WAP services desktop.
The WAP services browser page displays.
2. Tap and select Open location.
New Profile
Name:
Service Provider:
Gateway:
Gateway username:
Gateway password:
Confirm password:
<Enter name>
<[Always ask]>
<Enter password>
<Enter password>
<Enter IP number>
<Enter username>
OK