Ericsson R380 - Page 29

Interface and Navigation 29
NO
• Press and hold to turn your R380 on and off.
• End the active call.
• Reject an incoming call and send a busy tone.
• Press and hold to return to standby mode from a
menu.
• Go back one level in the menus, exit a setting or
leave a setting unchanged.
LEFT and RIGHT arrow keys
• Select the top-level menus.
• Move between the menu tabs.
U
P and DOWN arrow keys
• Scroll within a menu or list.
C
LEAR
• Erase entered characters/digits from the display
one by one.
• Press and hold to erase an entire row of entered
characters/digits.
• Disconnect the microphone (mute function)
when a call is in progress, press and hold.
• Mute the ring signal during an incoming call.
• Press and hold to put the R380 into silent mode,
when in the standby mode.
• Press during an active call to mute. Mute is active
as long as button is being pressed.
• After reading a message in the Inbox, press and
hold to delete. When
Erase? appears, press YES.
• Enter the phone book directly.
• Enter the digits 0 to 9.
• Enter associated characters or perform an
associated function, for example:
• Press and hold the 0 key to enter the
international character '+'
• Press and hold the 1 key to dial your voice mail.
(The numbered dialed must be entered in the
Telephony Settings dialog.)
• Enter a short-cut to a Phone book entry, press
and hold.