Ericsson R380s - Page 169

Extras 169
To initialize or re-initialize Safeword:
1.
Select
Initialise Safeword
from the list displayed in the One-time
passcodes view. The Initialise Safeword view appears in the
display.
2.
Select
Serial number:
and
Authorisation code:,
enter the required data
and then tap . If there is an incorrect value in any of the
sections a warning view appears stating which value is incorrect.
Otherwise, a second Initialise safeword view appears in the
display.
3.
Select
Key phrase:
, enter the key phrase and then tap . If the key
phrase is incorrect a warning message appears in the display.
Otherwise, a third Initialise Safeword view appears in the display.
4.
Select
User ID:
and enter your user identification.
5.
Select
Choose PIN:
and enter a PIN.
6.
Select
Confirm PIN:
, then enter the PIN that was entered in the
previous step and then tap . If the PIN’s do not match or the
user ID is incorrect a warning message appears in the display.
Otherwise, you will see a message confirming that the Safeword
has been successfully initialised. Select
OK
to return to the One-
time passcodes view. Change Safeword PIN appears in the
display.
To change the Safeword PIN:
1.
Select
Change Safeword PIN:
from the list displayed in the One-time
passcodes view. The Change Safeword PIN view appears in the
display.
2.
Select
Old PIN:
and then enter your PIN.
3.
Select
New PIN:
and then enter a new PIN.
4.
Select
Confirm PIN:
, then enter the PIN number that was chosen in
the previous step and then tap . If any of the PINs are incorrect
a warning message appears in the display. Otherwise, you see a
message telling you that the Safeword PIN has been successfully
initialised. Select
OK
to return to the One-time passcodes view.
To view your serial number:
•
Select
Get serial number
from the list displayed in the One-time
passcodes view. The serial number view appears in the display
providing you with the serial number of the initialised
authentication token (SecurID or SafeWord).
E-mail account settings
A number of e-mail accounts can be set up in your R380s. If more
than one account exists, you can select which account is to be used
when composing an e-mail message.
OK
OK
OK
OK